Shimverb Pro has the heritage of Shimverb. However, Mooer have made some great improvements on it. Shimverb Pro uses floating-point DSP chips, new hardware gives you a much wider space of development. Mooer have been through countless days and nights of experiments and algorithm modifications. The result is to make significant improvement on the Shimmer and the Reverb effects. Shimverb Pro assembles five reverb effects including Room,Hall,Church,Plate,Spring, giving you a different experience of sounds. It is equipped with a Decay knob which can adjust the room size for the reverb effect. Shimmer function adds a new feature, the combination of 5 switches and an Octave button, which creates a different effect and brings more excellent sounds to your music. In addition, Shimverb Pro has separated Shimmer footswitchs and a Dry/Wet knob, Hi Cut/Low Cut functions, stereo input and stereo output, all these new features are going to help you create a brand-new musical journey.
Adjustable Shimmer effect
5 Shimmer effects, can achieve +3,+4,+5,+7,+9 half-step modulation. And the OCTAVE button can add another octave on those 5 Shimmer effects. Shimmer effect can be activated by a separated foot switch.
The volume of the Shimmer effect could be adjusted by press down and hold the Shimmer footswitch and dial the Dry knob.
DRY and WET Knob
DRY knob controls the volume of the guitar sound and the WET knob controls the volume of the reverb effect.
HI CUT and LOW CUT Knob
These two knobs control the high and low frequencys of the reverb effect.
Trail ON/OFF function
Trail ON is the Buffer Bypass mode in which the reverb effect will be held even if you turn off the reverb effect.
Trail Off is the True Bypass mode in which the reverb effect will be immediately stopped when you turn off the reverb effect.
Tone saving
To save your tone, simply press down two footswitches together and hold for 3 seconds or longer. To use your saved tone, simply press down two footswitches together again.
- DC 9V Adapter
- Current Draw:210mA
- Solid metal shell design
Specifications
- Input: Two 1/4 Jacks (Impedance: 1M Ohms)
- Output: Two 1/4 Jacks (Impedance: 100 Ohms)
- Sampling Rate: 44.1K
- Sampling Accuracy: 32bit
- Power Requirements: AC adapter 9V DC (center minus plug)
- Current Draw: 210mA
- Dimensions: 106mm x 96mm x 53mm
- Wight: 440g
